Differences

This shows you the differences between two versions of the page.

--- demonstrations:9_equipment:power_supplies:1000w_power_supply:start [2019/02/14 23:33] – external edit 127.0.0.1
+++ demonstrations:9_equipment:power_supplies:1000w_power_supply:start [2020/02/04 20:30] (current) – demoroom
@@ Line 1: / Line 1: @@
-====== 1000w Power Supply ======
+====== 1000W Power Supply ======
-{{tag> needs_review untagged unlocated}}
+{{tag> power_supply low_voltage high_current dc equipment located}}
 <WRAP box right>
@@ Line 11: / Line 11: @@
 ===== Description =====
-Power Supply that can output up to 1000W (with Current up to 100A and Voltage up to 10 V)
+kW power supply capable of delivering up to 100A at 10V.
-About this power supply
-This power supply is most used in demonstration that requires a large amount of current to go through the wires
-// For example //
-For the railgun demonstration, the power supply is used to offer a current at 60 A or 100A in order to accelerate the steel rod.
-For the wire attraction and repulsion demonstration, the power supply offers current at 60 A to go through the wire to produce stronger magnetic field around the wire to show better attraction and repulsion force, and remember the current only go through the wire for about 7 seconds and turn the power off and wait to turn it on again.
-Other demonstration may require to use this power supply( will be indicated in catalog instruction)
-Last Updated on 2015/Apr/20
-===== Purpose =====
-===== Apparatus =====
-===== Setup =====
 ===== Notes =====
+This power supply is used in demonstrations which require large currents. Due to it's weight, it's typically stored on the bottom level of a cart. When needed, just take the cart.
-<WRAP group>
-<WRAP half column>
-</WRAP>
-<WRAP half column>
-</WRAP>
-</WRAP>
 <WRAP box>
@@ Line 54: / Line 21: @@
 </WRAP>
 <WRAP tablewidth 100%>
-| **Location** | ---- |
+| **Location** | In front of OPQ|
 | **Maker** | Unknown |
 | **Current State** | Working |