Differences

This shows you the differences between two versions of the page.

--- demonstrations:4_thermodynamics:4f_entropy_and_the_second_law:stirling_engine:start [2019/03/01 18:34] – demoroom
+++ demonstrations:4_thermodynamics:4f_entropy_and_the_second_law:stirling_engine:start [2020/03/13 21:01] (current) – demoroom
@@ Line 1: / Line 1: @@
 ====== Stirling Engine ======
-{{tag>heat thermodynamics liquid_nitrogen stirling stirling_engine heat_engine unlocated}}
+{{tag>heat thermodynamics liquid_nitrogen stirling heat_engine located}}
 <WRAP box right>
@@ Line 36: / Line 36: @@
   - Fill the styrofoam container with liquid nitrogen and place it under the engine so that a substantial part of the cylinder is in the LN2. This container may have to be refilled.
   - Give it a while to chill.
-  - The engine must then be started by hand. Note that since we're running the engine 'in reverse' by giving it the opposite heat differential the fan will also run in reverse. To start it, spin the blades clockwise (when looking from the front).
+  - The engine must then be started by hand. Note that since we're running the engine in reverse by giving it the opposite heat differential the fan will also run in reverse. To start it, spin the blades clockwise (when looking from the front).
 ===== Notes =====
@@ Line 66: / Line 66: @@
 </WRAP>
 <WRAP tablewidth 100%>
-| **Location** | ---- |
+| **Location** | C2 |
 | **Maker** | Unknown |
 | **Current State** | Working |