Voltage Supplier, offers up to 3000 Volts voltage supply, is used for the Can crusher demonstration and other demonstrations that requires high voltage input.

About the Voltage Supplier

1. The output of the supplier is at the back. 2. Turn on both of the switches to turn the Voltage supplier on 3. While using it to charge up other demo devices, remember to change the limit of supply only one step ahead from the actual reading of the voltage (For example, if you use it for the Can crusher demonstration: After turned on the supplier, turn the limit of the power source to 500 volts, and increase the limit to 1000 volts when the voltage approaches 500 volts. Then turn the limit of the source to 1500 volts when voltage approaches 1000 volts. Follow the same manner until the plates charged to 3000 volts. ) Last Updated : 2015/Apr/20