This is an old revision of the document!
Pictured on the cart that the amplifier is typically kept on. Often the function generator Is kept on the same cart, since for most demos that use the amplifier, the function generator is used as a signal source.
This is an Onkyo TX-SV343 Audio-visual control receiver. For demos, it's typically used as a signal amplifier to drive speakers or occasionally other solenoids. It's used in a number of demonstrations relating to acoustics.
The minimum impedances it can handle are listed on the back.
Moderate voltages are involved with this. By estimation (60W with 8Ω speakers) it should be outputting only up to 20V… But that hasn't been tested, so take typical precautions and don't touch the leads while the volume is turned up.
Demo room information
Location | —- |
Maker | Unknown |
Current State | Working |