UBC PHAS Demonstration Room Catalog

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Wireless Energy Transfer (induction) ======

{{tag> needs_review untagged unlocated}}

<WRAP box right>
{{IMG_2212.jpg?400|}}

// //
</WRAP>

===== Description =====

Using two RLC circuits, light a bulb that is not connected to a power source.    Classes Used: Phys 108, Phys 153





===== Purpose =====



===== Apparatus =====


transmitter and receiver



===== Setup =====



1. Plug the transmitter in to an outlet and let it warm up.
2. Place the receiver a distance from the transmitter. 
3. Turn the knobs to adjust the frequency of the signal.



===== Notes =====


1. Please do not place the receiver closer than 7 inches from the transmitter as this may burn out the bulb.  
2. It may take some time to properly adjust the knobs so that they signal can be properly received.
3. Avoid touching the capacitor as it has the potential to burn.  
Currently broken: will shock you if you use it.

<WRAP group>
<WRAP half column>

</WRAP>
<WRAP half column>

</WRAP>
</WRAP>


<WRAP box>
<WRAP centeralign> // Demo room information // 
</WRAP>
<WRAP tablewidth 100%>
| **Location** | ---- |
| **Maker** | Unknown |
| **Current State** | Working |
</WRAP>
</WRAP>

UBC PHAS Demonstration Room Catalog

User Tools

Site Tools

Page Tools