UBC PHAS Demonstration Room Catalog

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Electrostatic Windmill ======

{{tag> van_de_graaff electrostatics torque located}}

<WRAP box right>
{{windmill.jpg?400|}}

// //
</WRAP>

===== Description =====

Consists of a conductive metal 'wheel' or 'windmill' with radially protruding spikes ending in 90-degree turns and a stand with a needle on top that the wheel balances on.

===== Purpose =====

To show the "action of points", that charge can flow off pointed parts of a conductor maintained at a high potential. 

===== Apparatus =====

  * [[demonstrations:5_electricity_and_magnetism:5a_electrostatics:van_de_graaff_generator:start|Van de Graaff generator]]
  * Electrostatic windmill



===== Setup =====

Place windmill on top of the Van de Graaff generator. When the generator is turned on the windmill will begin to rotate.

===== Notes =====

The Van de Graaff generator vibrates significantly while running, so a piece of tape may be necessary to prevent the windmill from falling off of the generator.

The electrostatic windmill needs a high voltage to start turning, so move the grounding 'wand' far away from the head of the generator.


<WRAP group>
<WRAP half column>

</WRAP>
<WRAP half column>

</WRAP>
</WRAP>


<WRAP box>
<WRAP centeralign> // Demo room information // 
</WRAP>
<WRAP tablewidth 100%>
| **Location** | F1 |
| **Maker** | Unknown |
| **Current State** | Working |
</WRAP>
</WRAP>

UBC PHAS Demonstration Room Catalog

User Tools

Site Tools

Page Tools