User Tools

Site Tools


demonstrations:4_thermodynamics:4e_gas_law:compression_igniter:start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
demonstrations:4_thermodynamics:4e_gas_law:compression_igniter:start [2019/05/13 22:14]
demoroom
demonstrations:4_thermodynamics:4e_gas_law:compression_igniter:start [2020/03/13 20:30] (current)
demoroom
Line 1: Line 1:
 ====== Compression Igniter ====== ====== Compression Igniter ======
  
-{{tag> thermodynamics ideal_gas_law compression flash_point ​adiabatic_process unlocated}}+{{tag> thermodynamics ideal_gas_law compression flash_point ​adiabatic located}}
  
 <WRAP box right> <WRAP box right>
Line 23: Line 23:
  
 ===== Setup ===== ===== Setup =====
-  - Place a small piece of flammable material((brown paper towels bought in stores work, cotton balls work best. The greater the surface area-to-mass ratio, the better.)) in the glass tube by unscrewing the bottom platform. You can also drop it into the top and use a ramrod to push it down.+  - Place a small piece of flammable material((brown paper towels bought in stores work, cotton balls work best. The greater the surface-area-to-mass ratio, the better.)) in the glass tube by unscrewing the bottom platform. You can also drop it into the top and use a ramrod to push it down.
   - Before screwing the platform back, ensure the piston/​plunger is at the top of the cylinder (The ideal spot is marked with a line), then screw the platform back while holding the plunger at the line.    - Before screwing the platform back, ensure the piston/​plunger is at the top of the cylinder (The ideal spot is marked with a line), then screw the platform back while holding the plunger at the line. 
   - Push down quickly with a significant force. ​   - Push down quickly with a significant force. ​
Line 49: Line 49:
 </​WRAP>​ </​WRAP>​
 <WRAP tablewidth 100%> <WRAP tablewidth 100%>
-| **Location** | ---- |+| **Location** | C3 |
 | **Maker** | Unknown | | **Maker** | Unknown |
 | **Current State** | Working | | **Current State** | Working |
demonstrations/4_thermodynamics/4e_gas_law/compression_igniter/start.1557785682.txt.gz ยท Last modified: 2019/05/13 22:14 by demoroom