User Tools

Site Tools


demonstrations:4_thermodynamics:4e_gas_law:compression_igniter:start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Last revision Both sides next revision
demonstrations:4_thermodynamics:4e_gas_law:compression_igniter:start [2019/02/14 23:33]
127.0.0.1 external edit
demonstrations:4_thermodynamics:4e_gas_law:compression_igniter:start [2020/02/03 18:51]
demoroom
Line 1: Line 1:
 ====== Compression Igniter ====== ====== Compression Igniter ======
  
-{{tag>ignite ​compression ​gas pressure temperature pump paper tissue needs_review untagged ​unlocated}}+{{tag> ​thermodynamics ideal_gas_law ​compression ​flash_point adiabatic ​unlocated}}
  
 <WRAP box right> <WRAP box right>
Line 11: Line 11:
 ===== Description ===== ===== Description =====
  
-Light piece of tissue on fire using pressure   ​Classes Used: PHYS 153, SCIENCE ONE +Consists of a glass tube mounted inside a bigger plastic tube. A brass screw fitting is installed in the bottom so a metal base can be screwed in. A plunger with seal at the end is inserted into the top of the tube
- +
- +
- +
  
 ===== Purpose ===== ===== Purpose =====
  
 +Light a piece of tissue on fire via (approximately) adiabatic compression of gas. Demonstrates an example of one type of thermodynamic process. Shows how the ideal gas law can be used to predict what happens when a volume of air is rapidly compressed. Additionally can be used to demonstrate the flash point of cotton; certain materials spontaneously ignite when exposed to sufficiently high temperatures. ​
  
 ===== Apparatus ===== ===== Apparatus =====
  
- +  * Compression igniter 
-Compression ignitertissue or cotton +  * tissue or cotton ​(Very small pieces of cotton ball seem to work best.)
- +
  
 ===== Setup ===== ===== Setup =====
 +  - Place a small piece of flammable material((brown paper towels bought in stores work, cotton balls work best. The greater the surface-area-to-mass ratio, the better.)) in the glass tube by unscrewing the bottom platform. You can also drop it into the top and use a ramrod to push it down.
 +  - Before screwing the platform back, ensure the piston/​plunger is at the top of the cylinder (The ideal spot is marked with a line), then screw the platform back while holding the plunger at the line. 
 +  - Push down quickly with a significant force. ​
 +  - If the demo is to be done more than once, remove the plunger and base platform, and then push a piece of tissue through the glass tube with the wire to clean it between each attempt.
  
  
- +Currently there are three compression igniters available, two newer professional models, and one cheap blue plastic model.
-1. Place a small piece of tissue/​paper towel (brown paper towels bought in stores work) in the glass tube by unscrewing the bottom platform. +
-2. Before screwing the platform back, ensure the piston/​plunger is at the compression line (marked by the company produces), then screw the platform back while holding the plunger at the line.  +
-3. Push down quickly with a significant force.  +
-4. If the demo is to be done more than once, remove the plunger and base platform, and then push a piece of tissue through the glass tube with the wire to clean it between each attempt. +
- +
- +
-Currently there are three compression igniters available, two newer professional models ​(one is in using, other one is brand new), and one cheap blue plastic model. +
- +
-The cheap model is mostly for loan out to events or grad students, the newer model is used for lecture and instructing purpose. Cheap model can be found in Orange Closet.  +
  
 ===== Notes ===== ===== Notes =====
  
-If the plunger is not pushed fast enough, the tissue will smoke but not ignite. ​ +If the plunger is not pushed fast enough, the tissue will smoke but not ignite. ​If you haven'​t used this demonstration before it's highly recommended that you test it out beforehand, particularly if you're attempting to ignite a new material.
- +
-<iframe title="​YouTube video player"​ width="​480"​ height="​390"​ src="​http://​www.youtube.com/​embed/​ADeYiOYGGYY?​rel=0"​ frameborder="​0"​ allowfullscreen=""></​iframe> ​ Updated on: Dec 12, 2013+
  
 <WRAP group> <WRAP group>
Line 63: Line 49:
 </​WRAP>​ </​WRAP>​
 <WRAP tablewidth 100%> <WRAP tablewidth 100%>
-| **Location** | ---- |+| **Location** | C3 |
 | **Maker** | Unknown | | **Maker** | Unknown |
 | **Current State** | Working | | **Current State** | Working |
demonstrations/4_thermodynamics/4e_gas_law/compression_igniter/start.txt · Last modified: 2020/03/13 20:30 by demoroom