UBC PHAS Demonstration Room Catalog

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Bernoulli's Principle ======

{{tag> lost untagged unlocated}}

<WRAP box right>
{{rsz_20150505_132016.jpg?400|}}

// //
</WRAP>

===== Description =====

A demonstration that shows the Bernoulli's principle using a scale model of an airplane wing inside a wind tunnel. Use the Fog machine to show the air flowing around the wing.



Parts needed for this demonstration :   
- Fog machine  
- Rubber ball  
- Wing cross-section  
- Shop-vc  
- Plastic disk and air pressure gauge apparatus   
Instructions:   
1. Plug in the fog machine (Allow 5-10 minutes to heat up)   
2. Connect the Fog machine to the wind tunnel  
3. Insert one of the Wing models and screw it into place   
4. Use the protractors to measure the angle at which the wing models are placed  
5. Press the fog machine button to eject fog into the wind tunnel (The fog machine occasionally shoots fog on its own)   

Updated: May 5th, 2015

===== Purpose =====



===== Apparatus =====



===== Setup =====



===== Notes =====



<WRAP group>
<WRAP half column>

</WRAP>
<WRAP half column>

</WRAP>
</WRAP>


<WRAP box>
<WRAP centeralign> // Demo room information // 
</WRAP>
<WRAP tablewidth 100%>
| **Location** | ---- |
| **Maker** | Unknown |
| **Current State** | Working |
</WRAP>
</WRAP>

UBC PHAS Demonstration Room Catalog

User Tools

Site Tools

Page Tools