UBC PHAS Demonstration Room Catalog

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Loop The Loop ======

{{tag> centripetal_force mechanics acceleration potential_energy gravitational_potential located}}

<WRAP box right>
{{Ball_Bearing_Track.jpg?400|}}

// //
</WRAP>

===== Description =====

Steel track with a loop-the-loop and fittings to be held with lab stands.

===== Purpose =====

To demonstrate centripetal force. To show how our theory can be used to correctly make a prediction for the starting height required for the ball to clear the loop without falling. 

===== Apparatus =====

  * Loop-the-loop track
  * Small ball (ball bearings or other will do)
  * Two lab stands and connectors

===== Setup =====

Mount the track firmly on the lab stands using the connectors. Before presenting this demo it may be worthwhile to find the minimum height required to clear the loop and mark it with a piece of tape. 

When showing the demo, try dropping the ball from a number of different heights. Ask the students to predict how high the ball needs to be- as high as the top of the loop? (Enough potential energy for the height, but not for the kinetic energy, so it reaches the top and falls) or higher? Releasing the ball at 5/2 the height of the loop or higher should result in it going around the loop without falling.

<WRAP group>
<WRAP half column>

</WRAP>
<WRAP half column>

</WRAP>
</WRAP>


<WRAP box>
<WRAP centeralign> // Demo room information // 
</WRAP>
<WRAP tablewidth 100%>
| **Location** | MN4 |
| **Maker** | Unknown |
| **Current State** | Working |
</WRAP>
</WRAP>

UBC PHAS Demonstration Room Catalog

User Tools

Site Tools

Page Tools