====== Hover Pucks ======

{{tag> collision friction conservation_of_energy conservation_of_momentum untagged located}}

<WRAP box right>
{{IMG_2418.jpg?400|}}

// //
</WRAP>

===== Description =====

Air Hockey Hover Pucks.



Shoot one puck parallel to the edges of the table towards another puck that is stationary. Place a meter stick along each edge to measure the distances d1 and d2 that puck 1 and 2 travel from the point of collision, parallel to the sticks. A measurement can then be made of the directional velocities of each puck, theta 1 and theta 2. The angle between the two pucks, assuming an elastic collision, should always equal 90 degrees.  Updated on: 06/12/13

===== Purpose =====



===== Apparatus =====



===== Setup =====



===== Notes =====



<WRAP group>
<WRAP half column>

</WRAP>
<WRAP half column>

</WRAP>
</WRAP>


<WRAP box>
<WRAP centeralign> // Demo room information // 
</WRAP>
<WRAP tablewidth 100%>
| **Location** | M3 |
| **Maker** | Unknown |
| **Current State** | Working |
</WRAP>
</WRAP>