UBC PHAS Demonstration Room Catalog

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Galileo Thermometer ======

{{tag> measurement thermodynamics density buoyancy thermal_expansion located}}

<WRAP box right>
{{IMG_1667.jpg?400|}}

// //
</WRAP>

===== Description =====

A Galileo thermometer is a thermometer consisting of a sealed cylinder filled with clear liquid and containing several glass floats of varying density. 

===== Purpose =====

Demonstrate how the density of liquids can vary with temperature, and how this impacts the force of buoyancy experiences by objects immersed in the liquid. 

===== Apparatus =====

  * Galileo Thermometer
  * [[demonstrations:9_equipment:heat_gun:start|Heat Gun]]

===== Setup =====

Place the Galileo thermometer on the table and begin heating it up with the heat gun. Avoid bringing the heat gun very close to the thermometer as the thermal stress can cause fracture. As the thermometer warms up, the floats which previously were floating at the top will one-by-one begin to sink to the bottom. Eventually, all of the floats will sink to the bottom. 

===== Notes =====

This particular Galileo thermometer is read by looking at the lowest float that hasn't sunk to the bottom. The readings are unfortunately in Fahrenheit.

Contrary to immediate intuition the differently-colored liquids which half-fill the floats are entirely unrelated to the operation of this thermometer.((Typically, this is just dyed water or sometimes ethanol.)) Since the glass has a low coefficient of thermal expansion relative to the surrounding liquid, the density of the floats can be said to be relatively constant. The actual principle of operation of the Galileo thermometer has to do with the liquid the floats are floating in. This liquid (often water, but not necessarily) decreases in density as its temperature increases. The densities of the floats are adjusted with the weights hanging from them such that they sink when the temperature of the liquid matches the temperature indicated. 

<WRAP group>
<WRAP half column>

</WRAP>
<WRAP half column>

</WRAP>
</WRAP>


<WRAP box>
<WRAP centeralign> // Demo room information // 
</WRAP>
<WRAP tablewidth 100%>
| **Location** | C3 |
| **Maker** | Unknown |
| **Current State** | Working |
</WRAP>
</WRAP>