UBC PHAS Demonstration Room Catalog

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Ball And Ring ======

{{tag>bimetallic thermodynamics thermal_expansion located}}

<WRAP box right>
{{BallAndRing_001.jpg?400|}}

// //
</WRAP>

===== Description =====

Consists of a a copper plate and copper ring mounted on a lab stand, and a steel ball with a bent length of wire affixed.

===== Purpose =====

Demonstrates differing thermal expansion coefficients of unlike materials; demonstrates the widening of internal holes due to thermal expansion of a volume. 

===== Apparatus =====

  * Copper ring/plate with hole on stand
  * Steel ball
  * [[demonstrations:9_equipment:propane_torch:start|Propane torch and striker]]

===== Setup =====

Place the ball on either the ring or the hole in the plate. Use the blow torch to apply heat evenly to the area. Due to the dissimilar coefficients of thermal expansion, the plate/ring will expand faster than the ball and the hole will widen enough for the ball to drop through. The bent length of wire attached to the ball serves to prevent the potentially-very-hot ball from getting away, it should catch on the hole after it drops through. 

===== Notes =====

<WRAP center round important 60%>
**As with any demonstration involving the use of the propane torch, take caution. Don't transport the demo until is has been allowed to cool, and be careful that the ball doesn't fall and land on someone.**
</WRAP>


<WRAP group>
<WRAP half column>

</WRAP>
<WRAP half column>

</WRAP>
</WRAP>


<WRAP box>
<WRAP centeralign> // Demo room information // 
</WRAP>
<WRAP tablewidth 100%>
| **Location** | C4, torch on I6 |
| **Maker** | Unknown |
| **Current State** | Working |
</WRAP>
</WRAP>