UBC PHAS Demonstration Room Catalog

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Water Trajectories ======

{{tag> mechanics water pressure projectile_motion unlocated}}

<WRAP box right>
{{IMG_2267.jpg?400|}}

// //
</WRAP>

===== Description =====

Consists of a plated brass tube (so it's silver-colored) mounted on a piece of thick plexiglass. Three holes are drilled in the side at regular intervals. 

===== Purpose =====

To show different parabola paths of water in projectile motion and as an exercise in predicting range in projectiles. Also works well to illustrate how water pressure varies as a function of depth, and to show how flow rate varies as a function of pressure. 

===== Apparatus =====

  * Water trajectories cylinder
  * Water tank (the one from ((demonstrations:3_oscillations_and_waves:mechanical_waves:ripple_tank_wave_demonstration:start|this demo)) works well.)
  * Adhesive tape

===== Setup =====


The metal cylinder has holes bored at a spacing such that when the cylinder is completely full to a height 4H then water is ejected at heights H, 2H and 3H  Cover the three holes temporarily with tape and fill the cylinder with water. Then remove the tape, making sure that the water will drain into the tank. 

===== Notes =====

If a tap is available in the room, it can be used to keep the water level topped up so that the trajectories of the water remain constant while you measure them or talk about them. 


<WRAP group>
<WRAP half column>

</WRAP>
<WRAP half column>

</WRAP>
</WRAP>


<WRAP box>
<WRAP centeralign> // Demo room information // 
</WRAP>
<WRAP tablewidth 100%>
| **Location** | ---- |
| **Maker** | Unknown |
| **Current State** | Working |
</WRAP>
</WRAP>